All Products
產品 Product
🥖⚔️ 日本 川鳩 Suncraft｜波刃の怪物（Wave Blade Monster）麵包刀
不誇張說——這把真的太狠了。
行程大、用力小、切面漂亮，就是專為麵包／糕點廚師的商用波刃怪物。
你如果常切：
large campagne、focaccia、lodev、各種硬皮高含水麵包、
或是大量蛋糕盤切塊、三明治、塔類、蛋糕捲——
這把會很有感。
45cm 刀刃長度，在大型麵包上能用更少次數切得乾乾淨淨
大麵包不用一直來回鋸，切面更整齊、更省時間
例如 400mm × 600mm 的商用烤盤蛋糕
可以做到「一次切入、單刀切塊」
不用重新切入、反覆修整 → 斷面漂亮、屑少、效率超高
在長刃麵包刀中屬於非常輕便的設定
忙碌工作中更容易快速拿起來用
手柄針對握感與施力做過多次試驗，減少手腕與手臂疲勞
（連手比較小的工作人員也更好握）
鋒利而細膩的波浪形刀刃切割時不會「刮掉」斷面
切麵包屑更少、硬皮／柔軟內裡落差大的麵包更好切
三明治、果塔、奶油多的蛋糕捲等「多層不同硬度組合」也不太壓壞底層，切面更漂亮
波刃一般不做重磨（或重磨難度高），因此鋼材與初始研磨很關鍵
這款採用 防鏽且鋒利的鉬釩鋼，可長期使用
鋒利度仍由職人手工研磨把關，在嚴格品質標準下逐支製作
Sun Craft 是日本以「廚房用具與料理配件」提出新創意的公司。
他們思考的是：能不能用 MADE IN JAPAN / MADE IN SEKI（關市） 的製造技術，
去真正幫助麵包與糖果產業現場提升效率與產能？
因此在規劃、開發與量產前，收集了麵包／甜點職人的回饋，
目標很明確：簡化操作、提高生產力、提升工作效率與利潤。
📏 尺寸三種：
28cm
36cm
45cm
🧱 **鋼材：**鉬釩鋼
🎥 **使用影片：**https://www.youtube.com/watch?v=lPntzTVmVyY
🌐 **形象官網：**http://namibamonster.com/
本店販售之所有刀具、砥石、砧板等料理器具皆為個人衛生物品，猶豫期並非拆封+試用期，請各位購買前請先詳細了解產品使用用途及說明，如有不懂的地方請私訊洽詢。
No exaggeration — this knife is brutal in the best way.
Long stroke, low effort, clean cuts.
Designed specifically for professional bakers and pastry chefs who demand speed, consistency, and beautiful results.
If you regularly cut:
Large campagne
Focaccia
Lodev
High-hydration, hard-crust breads
Sheet cakes, sandwiches, tarts, roulades
—you’ll immediately feel the difference.
With a 45 cm blade length, large loaves can be sliced cleanly in fewer strokes.
Less sawing
Cleaner cut surfaces
Faster workflow
Perfect for oversized artisan breads.
For commercial trays such as 400 × 600 mm sheet cakes:
✔ Single entry
✔ One clean cut
✔ No re-cutting or correction
The result:
Cleaner cross-sections
Fewer crumbs
Significantly improved efficiency
Despite its extreme length, this knife is remarkably lightweight.
Easy to pick up during busy service
Reduced wrist and arm fatigue
Ergonomic handle tested for grip and force distribution
Comfortable even for users with smaller hands
Designed for long hours in real production environments.
The carefully refined wave serrations cut instead of tearing.
Benefits include:
Fewer crumbs on hard crusts
Clean cuts through soft interiors
Excellent performance on mixed-texture foods
Ideal for:
Sandwiches
Tarts
Cream-filled roulades
Multi-layer pastries
No crushing. No messy edges.
Serrated blades are rarely re-sharpened — which makes steel choice and initial grind critical.
Rust-resistant Molybdenum-Vanadium steel
Long-lasting sharpness
Each blade finished and inspected under strict quality control
Artisan hand-ground serrations for consistent performance
Built for long-term professional use.
Suncraft is a Japanese manufacturer known for developing functional kitchen tools with real-world impact.
Their mission:
Can Made in Japan — specifically Made in Seki craftsmanship —
genuinely improve efficiency and productivity in professional bakeries?
Before mass production, Suncraft:
Collected feedback from bakers and pastry chefs
Refined ergonomics, blade length, and cutting behavior
Focused on simplifying workflow and increasing output
The result is a tool designed to save time, reduce fatigue, and improve consistency in commercial environments.
28 cm
36 cm
45 cm
🧱 Steel: Molybdenum-Vanadium
🎥 Cutting demo: https://www.youtube.com/watch?v=lPntzTVmVyY
🌐 Official site: http://namibamonster.com/
All knives, whetstones, and cutting boards sold are personal hygiene items.
The cooling-off period does not apply to opened or used products.
Please confirm suitability before purchase.
If you have any questions, feel free to DM us before ordering.
this is not just a bread knife.
It’s a productivity weapon.
#Suncraft #WaveBladeMonster #BreadKnife
#MadeInJapan #MadeInSeki
#BakeryKnife #ProfessionalBaking
#PastryChef #BakeryTools
#45cmBreadKnife #CleanCuts #LowCrumb
#CommercialKitchen #EfficiencyTool
#JapaneseCraftsmanship
#HeXinHang #和欣行
